Specifications
- 285 mm wheel diameter
- 6 x 70 mm bolt pattern
- Spacer may be required for wheelbase clearance
- M5 x 12 mm stainless screws for QR mounting included
- Quick Release not included
- To mount M5 threaded QRs, use captive screws
- Mass: 1140 g
F64-SC V3 (Wireless | Simucube 2):
- Compatible exclusively with Simucube wheelbases
- Wireless connection to Simucube 2
- Simucube 1 requires additional receiver module
- Low latency
- Low energy consumption: 2-3 years of battery life on heavy daily usage
- Standard 14250 Lithium battery for maximum capacity
- Easy to swap battery via back side access window
- Button inputs via Simucube – no additional Windows controller
- Hot swapping wheels in-game without reconfiguring inputs
- Maximum signal quality via external stub antenna
F64-USB V3 (Wired):
- Platform-independent USB connection
- Shielded coiled cable with industrial-grade Binder M16 connector
- Cable connector length: approx. 64 mm
64 Inputs
- 14 x push buttons with positive tactile feeling
- 2 x protective button guards
- 2 x multifunctional 7-way joysticks (4 directions / rotate clock- anticlockwise/ push button)
- 2 x encoders inc. push button functionality, aluminium knob
- 2 x 12-position rotary switches, aluminium knob
- 2 x thumb encoders
- 2 x paddle shifters
- 2 x motorsport clutch paddles with electronic bite-point calibration
Magnetic Paddle Shifters
- CNC machined and anodized out of automotive aluminium
- Strong snap-action force
- Alternative magnets to reduce force included
- Reliable automotive switch
Contactless Clutch Paddles
- contactless, on-axis hall sensor for linear & unlimited operation
- precise and repeatable driver input
- waterproof, shock resistant, wide temperature range
- smooth operation due to pre-tensioned ball bearing design
- designed for harsh real racing environment
- precision cnc machined aluminium design
- market leading compact design
Electronic Bite-Point Calibration
- Precise adjustments in 1.0 % and 0.1 % increments
- Change bite-point via configuration tool or directly on the wheel rim:
- push both joystick buttons for 1s to acces bite-point mode
- LED lights up to indicate calibration mode
- rotate left joystick for 1.0 % increments / right joystick for 0.1 % increments (LED flashes to indicate changes)
- exit calibration mode by pushing both joysticks again for 1s
- Recommended procedure for finding best setting:
- enter calibration mode and set bite-point to high value, e.g. 80 %
- pull slave clutch only
- apply throttle
- reduce bite-point in 1.0 % increments (left joystick) until vehicle starts moving
- make test starts to fine tune desired bite-point setting
- exit bite-point calibration mode
- Recommended procedure for quick race starts
- pull both master and slave clutches
- apply throttle
- race start -> let master clutch snap
- it will take less than 20 ms to reach desired bite-point
- slowly release slave clutch
Button Labels
- 50 pcs button labels each black and white
- 72 pcs encoder labels (blue, green, red, black, yellow, white)
- Labels for various common steering wheel inputs
High Quality Finish
- Maximum grip level from closed, ergonomic rubber grips
- Machined out of automitive aluminium
- Black anodized and laser engraved
- Brushed frontplate surface finish
- Glass bed blasted paddle surface finish
Warranty
- In the case of consumers, the statutory warranty regulations apply.
- In the case of consumers, claims for damages for injury to life, body or health or based on the German Product Liability Act shall also remain unaffected. The same applies to any breach of duty on the part of our vicarious agents.
- In the case of entrepreneurs, warranty claims other than for damages shall become statute-barred one year from delivery of the goods. The statutory limitation periods for recourse claims of the entrepreneur according to Section 478 German Civil Code remain unaffected thereby.
Ascher Racing’s customer service will be pleased to assist you with any questions, complaints and objections on each working day from 08:30 to 12:30 (Central European Time) hours and from 13:30 to 17:00 (Central European Time) hours, as follows:
- Phone: +49 7971 9630-180
- E-Mail: info@ascher-racing.com
1. Free Shipping Eligibility
We offer free shipping for orders over $200 to all customers within the United States. Free shipping does not apply to orders outside of this region, as our service area is limited to the continental U.S.
2. Order Processing Times
Our standard order processing time is up to 7 business days. This time frame includes order confirmation, preparation, and packaging. Please note that certain items may require additional processing time depending on their availability and demand.
3. Signature Requirement for Deliveries
All shipments are sent with a “Signature Required” option. This ensures that your order is securely delivered to the appropriate recipient. If you cannot be available to sign for the delivery, please contact the carrier directly to arrange a re-delivery or hold for pickup at a designated access point.
4. Shipping for Large or Oversized Items
Orders that include large items, such as Sim Racing Chassis, Racing Seats, and Monitor Stands, may be shipped separately due to their size and weight. Different parts of your order may arrive on separate days as these items are processed through specialized logistics services.
5. Address Modifications
To maintain efficient and timely delivery, we are unable to modify delivery addresses once the package is out for shipping. Please double-check your shipping information during the checkout process to ensure accuracy.
Reviews
There are no reviews yet.